| Title of Paper |
Name of Authors |
Name of Journal where published |
No. |
Volume & Issue |
Year |
Pages |
| Whole body active vibration control of passenger biodynamics in quarter car model under random road excitations using ANFIS gain tuned PID-super twisting control |
Devdutt Singh |
International Journal of Dynamics and Control |
2195-2698 |
https://doi.org/10.1007/s40435-020-00623-0 |
Apr-20 |
https://doi.org/10.1007/s40435-020-00623-0 |
| A Review on Wear Behavior of Cutting Tools During Machining of Inconel, Nimonic, and Hastelloy |
Arun, Saransh and B. K. Bhuyan |
Indian Journal of Science and Technology |
0974-5645 |
Volume 12 , Issue 41 |
Nov-19 |
1-8 |
| A COMPARATIVE REVIEW OF NH3-H2O AND H2O-LiBr BASED VAPOUR ABSORPTION REFRIGERATION SYSTEMS |
Pratul Thapar, Dinesh Chawla, Kapil Dalal, Harshit Nanda, Rahul Garjola |
Dinesh Chawla |
0976-3105 |
Volume 10, Issue 04 |
Jul-19 |
7-11. |
| Analysis of wear behavior and surface properties of detonation gun-sprayed composite coating of Cr3C2–NiCr–CeO2 on boron steel |
J. Mehta, J. S. Grewal, K. K. Sadasivuni, and P. Gupta |
Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. |
2041-3076 |
Volume 233, Issue 12 |
Jul-19 |
2433–3 |
| A REVIEW ON THE REFRIGERATION SYSTEM POWERED BY PHOTOVOLTAIC (PV) ENERGY |
Dinesh Chawla, Anil Jat, Rahul Garjola, Subham Srivastava, Kunwar Kaushal, Kevin Varghese |
Engineering, IIOAB Journal |
0976-3104 |
Volume 10, Issue 03 |
Jul-19 |
22-26 |
| The Performance Analysis of A Refining System by Using Markov Process |
AMAN, ABHISHEK KUMAR, V. K. MAHNA & RAJIV KHANDUJA |
International Journal of Mechanical and Production Engineering Research and Development |
2249-8001 |
Volume 9, Issue 3 |
Jun-19 |
525-532 |
| Experiment Modeling of Response Parameters and CBN Tool Wear in Continuous and Interrupted Hard Turning of AISI D6 Tool Steel |
Manoj Nayak and Rakesh Sehgal |
Indian Journal of Science and Technology |
0974-5645 |
Volume12, Issue 18 |
May-19 |
DOI: 1017485/ijst/2019/v12i18/143902 |
| Performance Analysis and Optimization of Crytallization System of a Sugar Plant using Genetic Algorithm |
AMAN, ABHISHEK KUMAR, V. K. MAHNA & RAJIV KHANDUJA |
International Journal of Mechanical Engineering and Technology |
0976-6359 |
Volume 10, Issue 05 |
May-19 |
83-90 |
| Hard Turning using Cubic Boron Nitride: A perspective |
Manoj Nayak |
International Journal of Scientific Research and Review |
2279-543X |
Volume 7, Issue 4 |
Apr-19 |
377-382 |
| Review Of Power Generators Used In Electrical Discharge Machining Process, |
Manoj Nayak and Seema Nayak |
International Journal of Scientific Research and Review |
2279-543X |
Volume 7, Issue 4 |
Apr-19 |
388-394 |
| Ride Comfort Analysis of Passenger Body Biodynamics in Active Quarter Car Model using ANFIS Based Super Twisting Sliding Mode Control |
Devdutt Singh |
International Journal of Dynamics and Control |
2195-2698 |
Volume 25, Issue 12 |
Apr-19 |
1866-1882 |
| Realizing Low Cost Tooling for Reconditioning of Thread Roll |
Manoj Nayak |
Manoj Nayak |
2455-2143 |
Volume 3, Issue 11 |
Mar-19 |
19-24 |
| Passenger body vibration control in active quarter car model using ANFIS based super twisting sliding mode controller |
Devdutt Singh |
Simulation Modelling Practice and Theory |
1569-X |
Volume 89 |
Dec-18 |
100-118 |
| Modeling and control of passenger body vibrations in active quarter car system: a hybrid ANFIS PID approach |
Devdutt Singh |
International Journal of Dynamics and Control |
2195-2698 |
Volume 6, Issue 4 |
Dec-18 |
1649–1662 |
| Comparative performance analysis of connecting rod using two distinct composite materials by FEA |
Sushant, Ashish Saxena and Sunil Kumar |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 9, Issue 2 |
Dec-18 |
19-23 |
| Work Culture Enablers: Hierarchical Design for Effectiveness & Efficiency |
Kumar, R., Kumar,V. and Singh, S. |
International Journal of Lean Enterprise Research |
1754-2308 |
Volume 2, Issue 3 |
Aug-18 |
189-201 |
| Integrated Fuzzy-Dematel and Fuzzy-Topsis approach for Supplier Slection: A case study |
Agarwal, Narayan and Kant, Shashi |
Advance research in Electrical and Electronics Engineering |
2349-5812 |
Volume 5 , Issue 2 |
Jul-18 |
129 – 133 |
| Application of Supply Chain Management in Indian Cement Industy |
Mohammad Nizamuddin, Dain D Thomas |
International Journal of Scientific Research and Development |
2321-0613 |
Volume 6, Issue 4 |
Jul-18 |
1414-1418 |
| Modeling of MRR due to Traveling Wire Electro-Chemical Spark Machining Process using FEM |
Pravabati Bhuyan, Satish Mishra and Basanta Kumar Bhuyan |
International Journal for Scientific Research & Development |
2321-0613 |
Volume 6 , Issue 3 |
Jun-18 |
2271-2276 |
| Optimisation of performance and emission characteristics of CI engine fuelled with Mahua oil methyl ester–diesel blend using response surface methodology |
Vinay , Bhupender Singh, Ashok Kumar Yadav |
International journal of Ambient Energy |
2162-8246 |
DOI: 10.1080/01430750.2018.1484804 |
Jun-18 |
DOI: 101080/0143075020181484804 |
| Passenger Body Vibration Control in Active Quarter Car Model using Hybrid ANFIS PID Controller |
Devdutt |
International Journal of Intelligent Systems and Applications |
2074-9058 |
Volume 10, Issue 5 |
May-18 |
51-60 |
| Modelling And Simulation Of A Variable Cooling System For Domestic Water Purifier |
Shailesh Singh Sengar, Prateek Mittal, Sorabh |
International Journal of Mechanical and ProductionEngineering Research and Development |
2249-6890 |
Volume 8, Issue 2 |
Apr-18 |
1265-1270 |
| Static and Thermal Analysis on Mechanical Shaft Using Titanium Alloy |
Rishabh, Prateek Srivastava, Atul Raj Shukla, Bhupender Singh |
INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY |
2349-6002 |
Volume 4 Issue 11 |
Apr-18 |
1159-1165 |
| Optimization of biodiesel production from Annona squamosa seed oil using response surface methodology and its characterization |
Ashok Kumar Yadav, Vinay , Bhupender Singh |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects |
1556-7230 |
Volume 40, Issue 9 |
Apr-18 |
1051-1059 |
| Wear behavior of boron steel coated cerium oxide tungsten carbide cobalt coating |
J. Mehta, J. S. Grewal, and P. Gupta |
Journal of Applied Science and Engineering |
1560-6686 |
Volume 21, Issue 4 |
Jan-18 |
519–526 |
| Design Approach and Fabrication of Prototype Centrifuge |
Agarwal V, Pramanik D, Kant, Shashi |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 9, Issue 2 |
Dec-17 |
24-30 |
| Solving VRP in an indian transpotation firm through Clark and Wright Algorithm: A case Study |
Prateek Mittal, Nikhil Garg, Himank Ambastha, Charanjeev Mehndiratta |
International Journal of Emerging Technologies in Engineering and research |
2454-6410 |
Volume 5, Issue 10 |
Oct-17 |
163-168 |
| Modeling and analysis on supply chain characteristics using ISM technique |
Kumar, R., Kumar,V. and Singh, S. |
Apeejay Journal of Management and Technology |
0974-3294 |
Volume 12, Issue 1 |
Jul-17 |
21-29 |
| Active Vibration Control Of Passenger seat in Quarter car model using supertwisting controller |
Devdutt |
International Journal of control and automation |
2195-2698 |
Volume10, Issue 11 |
Nov-17 |
83-94 |
| Passenger Seat Vibration Comparison Using ANFIS Control in Active Quarter Car Model |
Devdutt |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume11, Issue 7 |
Jul-17 |
1-1378 |
| Passenger Seat Vibration Comparison Using ANFIS Control in Active Quarter Car Model |
Devdutt |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 11, Issue 7 |
Jul-17 |
1-1378 |
| Passenger Seat Vibration Control in Active Quarter Car Model Using Bat Algorithm Based PID Controller, |
Devdutt |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 9, Issue 1 |
Jun-17 |
39-46 |
| Passenger seat vibration control of a semi-active quarter car system with hybrid Fuzzy – PID approach, |
Devdutt, M.L. Aggarwal |
International Journal of Dynamics and Control |
2195-2698 |
Volume 5, Issue 2 |
Jun-17 |
287-296 |
| DESIGN AND FABRICATION OF TWOWHEELER SERIES HYBRID VEHICLE |
Sushant, Ashish Saxena, Rohit Borah |
INTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING |
2321-3051 |
Volume 5 Issue.6 |
Jun-17 |
1-8. |
| Optimization of WEDM parameters using Taguchi Technique in machining of EN31 Tool Steel |
Dain D Thomas, Sushant |
Imperial Journal of Interdisciplinary Research |
2454-1362 |
Volume 3, Issue 5 |
Jun-17 |
864-826 |
| Surface Roughness Optimization in End Milling Using Taguchi Method and Anova |
Ashish Saxena, Sushant, Anubhav Khandelwal |
International Journal of Research In Aeronautical and Mechanical Engineering |
2321-3051 |
Volume 5, Issue.6 |
Jun-17 |
9-16. |
| Self-Tuning Fuzzy Control of Seat Vibrations of Active Quarter Car Model |
Devdutt |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 11, Issue 5 |
May-17 |
1053-1059 |
| Summing ANFIS PID Control of Passenger Seat Vibrations in Active Quarter Car Model |
Devdutt |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume11, Issue 5 |
May-17 |
1060-1066 |
| Self-Tuning Fuzzy Control of Seat Vibrations of Active Quarter Car Model |
Devdutt |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 11, Issue 5 |
May-17 |
1053-1059 |
| Summing ANFIS PID Control of Passenger Seat Vibrations in Active Quarter Car Model |
Devdutt |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume11, Issue5 |
May-17 |
1060-1066 |
| Modeling and analyzing the impact of lean principles on organizational performance using ISM approach |
Kumar, R., Kumar,V. and Singh, S. |
Journal of Project Management |
2371-8374 |
Volume 2, Issue 1 |
May-17 |
37-50 |
| Experimental Investigation of Cutting Parameters influence on Surface Roughness in turning of Alloy Steel ASTM A182, Grade F91 |
Vivek Jakhar, Dr Manoj Nayak, Nitin Sharma |
International Journal of Advanced Research in Mechanical Engineering & Technology |
2454-4736 |
Volume 3 , Issue 1 |
Mar-17 |
21-25 |
| A Literature Review on Optimization of Input Cutting Parameters for Improved Surface Finish in Turning Process |
Vivek Jhakkar and Manoj Nayak |
International Research Journal of Engineering & Technology |
2395 -0056 |
Volume 4, Issue 3 |
Mar-17 |
2810-2815 |
| Role of thermal spray coatings on wear, erosion and corrosion behavior: A review |
J. Mehta, V. K. Mittal, and P. Gupta |
J. Appl. Sci. Eng. |
1560-6686 |
Volume 20, Issue 4 |
Jan-17 |
445–452 |
| Relationship establishment between lean manufacturing and supply chain characteristics to study the impact on organizational performance using SEM approach |
Kumar, R., Kumar,V. and Singh, S. |
International Journal of Value Chain Management |
1741-5365 |
Volume 7, Issue 4 |
Nov-16 |
352-367 |
| Optimization of Job Shop Scheduling with Transportation Time Using Genetic Algorithm |
Sunil kumar ,Rakesh Kumar Phanden and R.V. Singh |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 8, Issue 1 |
Jun-16 |
1-5. |
| Active Vibration Control of Passenger Seat with HFPIDCR Controlled Suspension Alternatives |
Devdutt, M.L. Aggarwal |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 10, Issue 5 |
May-16 |
916-23 |
| Active Vibration Control of Passenger Seat with HFPIDCR Controlled Suspension Alternatives |
Devdutt, M. L. Aggarwal |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 10, Issue 5 |
May-16 |
916-23 |
| Effect of music on productivity of industrial workers engaged in repetitive work, |
Manila Talwar, Sachin Marwah, Virender Narula and Sushant |
International Journal of Research in Aeronautical and Mechanical Engineering |
2321-3051 |
Volume 4, Issue.4 |
Apr-16 |
11-19. |
| Design and Comparative Performance Analysis of Multi Leaf Spring by F.E.A. |
Sushant, Sahil Sardana |
International Journal of Research in Aeronautical and Mechanical Engineering |
2321-3051 |
Volume 4, Issue 4 |
Apr-16 |
20-28 |
| Industry-Academia Interaction: Way to Make in India |
Kaushik, M., Kumar, R., Dodeja, D.K. and Ritu |
International Journal for Scientific Research & Development |
2321-0613 |
Volume 3, Issue 12 |
Mar-16 |
965-967 |
| Increasing Productivity by Reducing Cycle Time in Assembly line of an Automotive Industry using Work Study Techniques. |
Virender Narula |
International Journal of Engineering Research & Technology |
2278-0181 |
Volume 5 Issue 02 |
Feb-16 |
272-275 |
| Finite element modeling of magnetic flux leakage from metal loss defects in steel pipeline |
Sorabh, Arvind gupta, Kannan Chandrasherkhar |
Journal of failure analysis and prevention |
1864-1245 |
Vol 16, Issue 1 |
Feb-16 |
http://linkspringercom/article/101007/s11668-016-0073-6 |
| Continuous and Interrupted Hard Turning Using CBN-L Tools at Moderate Cutting Speeds |
Rakesh Sehgal, Manoj Nayak & Rajiv Kumar Sharma |
International Journal of Emerging Technology and Advanced Engineering |
2250-2459 |
Volume 5, Issue 4 |
Jan-16 |
41-48 |
| Active solar still |
Shailesh S. Sengar, Sorabh |
MR International Journal of Engineering & Technology |
0975-4997 |
Volume 7, Issue 2 |
Dec-15 |
56-59 |
| Improving Quality of Education using Six Sigma DMAIC Methodology: A Case Study of a Self-Financed Technical Institution in India |
Virender Narula |
International Journal of Quality Assurance in Engineering and Technology Education |
2155-496X |
Volume 4, Issue 2 |
Dec-15 |
49-61 |
| Fuzzy control of passenger ride performance using MR shock absorber suspension in quarter car model |
Devdutt, M.L. Aggarwal |
International Journal of Dynamics and Control |
2195-2698 |
Volume 3, Issue 4 |
Dec-15 |
463-469 |
| Application of six sigma DMAIC methodology to reduce service resolution time in a service organization. Accounting |
Virender Narula, Sandeep Grover |
Growing Science |
2369-7407 |
Volume 1, Issue 1 |
Nov-15 |
43-50 |
| Quality Assurance of Screw Thread through ANOVA Analysis. |
Arjun Mohan Gupta, Md. Arif Sanjid,Mr.Virender Narula |
International Journal of Engineering and Technical Research |
2321-0869 |
Volume 3, Issue 10 |
Oct-15 |
16-19 |
| Relation between Metric and Whitworth Thread Through Regression Analysis. |
Arjun Mohan Gupta, Md. Arif Sanjid,Mr.Virender Narula |
International Journal of Engineering and Technical Research |
2321-0869 |
Volume 3, Issue 10 |
Oct-15 |
12-15. |
| Modelling of Surface Roughness in coated Wire Electric Discharge Machining Through Response Surface Methodology |
Dain Thomas, Rajeev Kumar, G.K. Singh, Prashant Sinha, Sachin Mishra |
Materials Today: Proceedings |
2214-7853 |
Volume 2, Issue 4-5 |
Sep-15 |
3520 – 3526 |
| Modelling of Process Parameters in Coated Wire Electric Discharge Machining through response Surface Methodology |
Dain Thomas, Rajeev Kumar, G.K. Singh, Prashant Sinha, Sachin Mishra |
Materials Today: Proceedings |
2214-7853 |
Volume 2, Issue 4-5 |
Sep-15 |
1642 – 1648 |
| Optimization of WEDM of AISI D3 tool steel using orthogonal array with PCA |
Prashant Sinha, Rajeev Kumar, G.K. Singh, DainThomas, Tushar Srivastava |
Materials Today: Proceedings |
2214-7853 |
Volume 2, Issue 4-5 |
Sep-15 |
2512 – 2521 |
| Multi-Objective Optimization of Wire EDM of AISI D3 Tool Steel using Orthogonal Array with Principal Component Analysis |
PrashantSinha, Rajeev Kumar , G.K.Singh, Dain Thomas |
Materials Today: Proceedings |
2214-7853 |
Volume 2, Issue 4-5 |
Sep-15 |
3778 – 3787 |
| Mechanical Characterization and Machinability Behavior of Annealed AISI D6 Cold Working Steel |
Manoj Nayak, Rakesh Sehgal and Rajiv Kumar Sharma |
Indian Journal of Materials Science |
|
Article ID 196178 |
Aug-15 |
1-12. |
| Application of Attribute Gage Repeatability and Reproducibility (Gage R&R) Analysis to improve Customer Queries and Complaint Process-A Case Study in a Service Organization |
Virender Narula |
Journal of Advanced Research in Production and Industrial Engineering |
2456-429X |
Volume 2, Issue 2 |
Jul-15 |
12-16 |
| Significance of rational sub grouping of data for Interpreting X bar and R Charts-A Case Study in a Service Organization |
Virender Narula |
Journal of Advanced Research in Production and Industrial Engineering |
2456-429X |
Volume 2, Issue 2 |
Jul-15 |
63-67 |
| Manufacturing Systems Selection using Fuzzy AHP |
Kant, Shashi |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 7, Issue 1 |
Jun-15 |
22-28 |
| Establishing the relationship among principles of Lean Manufacturing, Supply Chain Characteristics, Manufacturing Strategies and Performance theoretically in an Indian environment |
Kumar, R., Kumar, V. and Singh, S. |
Journal of Industrial Engineering |
0970-2555 |
Volume 8, Issue2 |
Feb-15 |
25-31 |
| Effect of Tool Material Properties and Cutting Conditions on Machinability of AISI D6 Steel During Hard Turning |
Manoj Nayak, Rakesh Sehgal |
Arabian Journal of Science and Engineering |
2191-4281 |
Volume 40 , Issue 4 |
Feb-15 |
1151–1164 |
| Simultaneous Optimization of Semiactive Quarter Car Suspension Parameters using Taguchi Method and Grey Relational Analysis |
Devdutt, M.L. Aggarwal |
International Journal of Recent Advances in Mechanical Engineering |
2200-5854 |
Volume 4, Issue 1 |
Feb-15 |
61-75 |
| Managing the utility of manufacturing process facilities through Lean Supply Chain |
Kumar, R., Kumar, V., Singh, S. and Threja, P. |
Journal of Advance Research in Production and Industrial Engineering |
2456-429X |
Volume 2, Issue 1 |
Jan-15 |
13-23 |
| World Class Manufacturing System: A Need of the Time |
Kumar, R. and Lamba, N. |
Journal of Advance Research in Production and Industrial Engineering |
2456-429X |
Volume 2, Issue 1 |
Jan-15 |
33-38 |
| Six Sigma: Literature Review and Implications for Future Research |
Virender Narula, Sandeep Grover |
International Journal of Industrial Engineering |
2008-4889 |
Volume 26, Issue 1 |
Jan-15 |
13-26 |
| Simultaneous Optimization of Semiactive Quarter Car Suspension Parameters using Taguchi Method and Grey Relational Analysis |
Devdutt, M.L. Aggarwal |
International Journal of Recent advances in Mechanical Engineering |
2200-5854 |
Volume 4, Issue1 |
Jan-15 |
61-75 |
| Application of Six Sigma DMAIC Methodology for Reducing Defects in a Foundry Shop |
Virender Narula, Sandeep Grover |
Materials Science Forum |
1662-9752 |
Volume 808 |
Dec-14 |
79-87 |
| Hybrid Fuzzy-PID Control of a Semi-Active Quarter Car System |
Devdutt, M.L. Aggarwal |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 6, Issue 2 |
Dec-14 |
21-26 |
| Design & Fabrication of a Special Tool to Produce Square Hole |
Shailesh S. Sengar , Vaibhav Raghav ,Chadaram Srinivasu |
Procedia Materials Science |
2211-8128 |
Volume 6 |
Sep-14 |
1823-1836 |
| Role of lean manufacturing and supply chain characteristics in accessing the manufacturing performance |
Kumar, R., Kumar, V. and Singh, S. |
International Journal of Uncertain Supply Chain Management |
2291-6830 |
Volume 2, Issue 4 |
Sep-14 |
219–228 |
| Comparative Analysis of Passenger Ride Comfort Using Various Semi-Active Suspension Alternatives |
Devdutt, M.L. Aggarwal |
International Journal of Recent advances in Mechanical Engineering |
2200-5854 |
Volume 3, Issue 3 |
Aug-14 |
79-89 |
| Comparative Analysis of Passenger Ride Comfort Using Various Semi-Active Suspension Alternatives |
Devdutt, M.L. Aggarwal |
International Journal of Recent advances in Mechanical Engineering |
2200-5854 |
Volume 3, Issue 3 |
Aug-14 |
79-89 |
| Effect of Lean Principles on organizational efficiency |
Kumar, R., Kumar, V. and Singh, S. |
International Journal of Applied Mechanics and Materials |
1662-7482 |
Volumes 592-594 |
Jul-14 |
2613- 2618 |
| Design and Comparative Performance Analysis of Two-Wheeler Connecting Rod Using Two Different Materials Namely Carbon 70 Steel and Aluminum 7068 by Finite Element Analysis |
Sushant, Victor Gambhir |
International Journal of Research in Aeronautical and Mechanical Engineering |
2321-3051 |
Volume 2, Issue 6 |
Jun-14 |
63-78 |
| Passenger Seat Vibration Control of Quarter Car System with MR Shock Absorber |
Devdutt, M.L. Aggarwal |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 8, Issue 5 |
May-14 |
707-714 |
| Experimental Study of Traveling Wire Electrochemical Spark Machining of Borosilicate Glass |
Basanta Kumar Bhuyan and Vinod Yadava |
Materials and Manufacturing Processes |
1042-6914 |
Volume 29, Issue 3 |
Mar-14 |
298-304 |
| Experimental modeling and multi response optimization of traveling wire electro-chemical spark machining (TW-ECSM) of Pyrex glass |
Basanta Kumar Bhuyan and Vinod Yadava |
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture |
0954-4054 |
Volume 228, Issue 8 |
Jan-14 |
902-916 |
| Passenger seat vibration control of semi-active quarter car system with fuzzy controller |
Devdutt, M.L. Aggarwal |
YMCAUST International Journal of Research |
2319-9377 |
Volume 2, Issue 1 |
Jan-14 |
6-14 |
| Fuzzy Logic Control of a Semi-Active Quarter Car System |
Devdutt, M.L. Aggarwal |
World Academy of Science, Engineering and Technology |
2010-3778 |
Volume 8, Issue 1 |
Jan-14 |
163-167 |
| Modeling and Optimization of Traveling Wire Electro-Chemical Spark Machining process. |
Basanta Kumar Bhuyan and Vinod Yadava |
International Journal of Industrial and Systems Engineering |
1748-5037 |
Volume 18, Issue 2 |
Jan-14 |
139-158 |
| An Overview of Just-in-Time for Performance Optimization in Manufacturing System |
Parvez, M. and Kant, Shashi, |
Global Sci-Tech (AFJST) |
|
Volume 6, Issue 3 |
Jan-14 |
138-145 |
| Optimization of Job Shop Scheduling Using Genetic Algorithm |
Sunil Kumar and R.V. Singh |
MR International Journal of Engineering and Technology |
0975-4997 |
Volume 6, Issue 2 |
Dec-13 |
54-58 |
| Experimental Modeling and Multi-Objective Optimization of Traveling Wire Electro-Chemical Spark Machining (TW-ECSM) Process |
Basanta Kumar Bhuyan and Vinod Yadava |
Journal of Mechanical Science and Technology |
1738-494X |
Volume 27, Issue 8 |
Sep-13 |
2467-2476 |
| Six Sigma and Pitfalls of TQM |
Virender Narula |
YMCAUST International Journal of Research |
2319-9377 |
Volume 1, Issue 1 |
Jan-13 |
88-94 |
| Comparative analysis for measures of forecast accuracy: A Case Study |
Kumar, R., Lamba, N., Sharma, A., and Chugh, P. |
International Journal on Emerging Technologies |
2249-3255 |
Volume4, Issue1 |
Jan-13 |
26-31 |
| Enhancement in productivity in sheet metal industry through Lean Principles |
Kumar, G., Kumar, R. and Gupta, S.K. |
International Journal on Emerging Technologies |
2249-3255 |
Volume4, Issue1 |
Jan-13 |
186-191 |
| Fuzzy Control of Seat Vibrations for Semi-Active Quarter Vehicle System Utilizing Magnetorheological Damper |
Devdutt, M.L. Aggarwal |
International Journal of Engineering Inventions |
2278-7461 |
Volume 1, Issue 12 |
Dec-12 |
51-56 |
| Experimental Investigations of Traveling Wire Electro-Chemical Spark Machining (TW-ECSM) of Borosilicate Glass. |
Basanta Kumar Bhuyan and Vinod Yadava |
Asian Review of Mechanical Engineering |
2249-6289 |
Volume 1, Issue 2 |
Jul-12 |
24-29 |
| New Paradigm in Machining |
Manoj Nayak, Rakesh Sehgal |
International Journal of Engineering & Technology |
2227-524X |
Volume 4, Issue 1 |
Jun-12 |
31-42 |
| Lean Implementation in manufacturing industry: a case study |
Gupta, S.K., Singh, R.V., Mahna, V.K. and Kumar, R. |
International Journal of Industrial Engineering Research and Development |
0976-6987 |
Volume 3, Issue 1 |
Jun-12 |
13-20 |
| Mixed Model Assembly Line Balancing: Strategic Tool to Improve Line Efficiency in Real world |
Gupta, S.K., Mahna, V.K., Singh, R.V. and Kumar, R. |
International Journal of Industrial Engineering Research and Development |
0976-6987 |
Volume 3, Issue 1 |
Jun-12 |
58-66 |
| Improvement in Operational Efficiency of equipment through TPM: A case study |
Gera, G., Saini, G., Kumar, R. and Gupta, S.K. |
International Journal of Industrial Engineering Research and Development |
0976-6987 |
Volume 3, Issue 1 |
Jun-12 |
67-73 |
| Optimizing the unevenness in production scheduling through mathematical approach: A Case Study |
Gupta, S.K., Mahna, V.K., Singh, R.V. and Kumar, R. |
International Journal of Industrial Engineering Research and Development |
0976-6987 |
Volume 3, Issue 1 |
Jun-12 |
74-91 |
| Managing Inventory waste through Lean Tool: A case study |
Gupta, S.K., Singh, R.V. and Kumar, R. |
International Journal on Emerging Technologies |
2249-3255 |
Volume3, Issue1 |
Feb-12 |
04-17 |
| An empirical study approach on TPM implementation in manufacturing industry. |
Sharma, K., Gera, G., Kumar, R., Chaudhary, H.K. and Gupta, S.K. |
International Journal on Emerging Technologie |
2249-3255 |
Volume3, Issue1 |
Feb-12 |
18-23 |
| Development of Traveling Wire Electro-Chemical Spark Machining (TW-ECSM) Setup. |
Basanta Kumar Bhuyan and Vinod Yadava |
Journal of Engineering & Technology Education |
2229-631 X |
Volume 6, Issue 2 |
2012 |
28-33 |
| A Proposed Method for Error Prediction and Compensation in Hard Turning |
Manoj Nayak, Rakesh Sehgal |
M R International Journal of Engineering & Technology |
0975-4997 |
Volume 3 , Issue 1 |
Jun-11 |
34-40 |
| Implementation of Taguchi Methodology for Defect Reduction in Manufacturing Industry |
Kumar, R., Prajapati, D.R. and Singh, S. |
International Journal of Industrial Engineering Research and Development |
0976-6987 |
Volume 2, Issue 1 |
May-11 |
01-14 |
| Application of SPC tool for finding variation in the Process Output (A Case Study) |
Sardana, S., Kumar, R., Bajwa, M. and Gulati, P. |
International Journal of Industrial Engineering Research and Development |
0976-6987 |
Volume 2, Issue 1 |
May-11 |
46-58 |
| Boiler Tube Failure in High Pressure Steam Generator |
Binod Kumar Singh and Manoj Nayak |
Journal of International Association on Electricity Generation, Transmission and Distribution ( Afro-Asian Region) |
2229-4449 |
Volume 21, Issue 1 |
Jun-09 |
37-47 |
